TY-3213 Water-soluble acrylic resin

This product has been neutralized and can be directly diluted with water. The viscosity will slowly decrease in the early stage of dilution, and then remain unchanged as the amount of water added increases. This is a normal phenomenon. When the amount of water added reaches 140-150% of the resin mass, the system viscosity decreases as the amount of water added increases. The amount of water added to the formula is determined according to the actual needs of the customer.

This product can be formulated into colored paint by adding water-based color paste. Before adding the color paste, an appropriate amount of PH regulator should be added to control the PH to remain stable. Before adding the color paste, test whether the resin and the color paste are compatible. In the water-soluble resin coating system, the system VOC can be reduced by adding sufficient water, and the construction and stability of the coating can also be improved by adding sufficient co-solvents. Recommended co-solvents: ethylene glycol butyl ether, diethylene glycol butyl ether, dipropylene glycol methyl ether, etc. In addition, ethanol, isobutyl alcohol, and isopropanol are also good choices. Pay attention to the changes in resin viscosity during use. The type of co-solvent and the optimal amount of addition ultimately need to be determined experimentally. This product can be used with fully etherified amino resins such as Cymel 303LF, or partially etherified resins such as Cymel 327 to improve performance. The suitable baking temperature range is 120-190°C, and the baking temperature is mainly set according to the selection of amino groups.This product can also be used with other baking type water-soluble resins (water-soluble polyester, water Please test the storage stability after mixing.